| Q: |
What R-value is the Energy Miser® Insulated Ceiling & Wall System available
in?
|
| A: |
The Energy Miser® system is available at R-10 and higher R-values.
|
|
| Q: |
What kind of thermal savings can I achieve using the Energy Miser® system?
|
| A: |
The Energy Miser® system is ASTM C236 Guarded Hot Box tested to perform to
certified R-values. It is possible to save as much as 60% on your utility
bills.
|
|
| Q: |
How does the Energy Miser® system install in my temperature-controlled
warehouse?
|
| A: |
The Energy Miser® hardware parallels to the purlins and is attached to the
bottom, suspending down the adequate distance needed for proper ventilation.
|
|
| Q: |
What is the Energy Miser® hardware?
|
| A: |
The hardware consists of rows of galvanized tubes spaced at 10'-12' on center.
They attach to virtually any type building using an I-Bolt and the appropriate
type clip-head for the structure.
|
|
| Q: |
What does proper ventilation mean?
|
| A: |
It’s recommended that ridge and eave vents be installed in order to control
condensation the cavity between the insulation and the roof deck.
|
|
| Q: |
Can ICA install the ventilation?
|
| A: |
Yes! The crews ICA sends to install the insulation have a great amount of
experience installing the ventilation. It is recommended that an independent
engineer or consultant be contacted to insure the proper quantity of
ventilation is used for your facility.
|
|
| Q: |
Can I insulate my walls with the Energy Miser® system?
|
| A: |
Yes! The Energy Miser® system is designed so that the walls can be insulated in
conjunction with the ceiling. In doing this, the ceiling and wall are
manufactured as one piece.
|
|
| Q: |
I have this ugly “blow-on” insulation that keeps falling to the ground. Do I
have to remove it?
|
| A: |
No! The Energy Miser® system can be installed without having to remove any
existing insulation.
|
|
| Q: |
Does ICA have a representative or installer in my area that can come look at my
temperature controlled warehouse?
|
| A: |
ICA has offices in Kansas and New York. Contact us at (800) 373-4262 for
pricing inquiries. We have crews that travel across the country that can do
installations in every size rink.
|
|
| Q: |
I have a maintenance crew and I think I can install the Energy Miser® myself.
Can this be done?
|
| A: |
Yes! ICA can sell the materials only if you want to install the system yourself
or have a local contractor do it. We have an installation manual and phone
support for any questions. You can also hire one of ICA’s foremen for a couple
of days to get your crew trained. |
|
| Q: |
I like the way the Energy Miser® system installs, but I don’t want to lose the
light I get from my skylights.
|
| A: |
No problem. For a nominal price the skylights can be “boxed-out” and the
ceiling fastened around them. But it has been our experience that most
skylights aren’t energy efficient and a majority of companies have lights on
during the day. Covering the skylights will save utility costs since the
insulation facing is an 85% reflective material.
|
|
| Q: |
Is the Energy Miser® system my only option that will provide a new ceiling?
|
| A: |
No! ICA also gives you the option for a fabric over cable system. This consists
of installing high-tension galvanized wire at 10' to 12' intervals and
installing the same facing that’s used on the insulated ceiling. It also
eliminates the need for ventilation. |
|
| Q: |
What if I have a sprinkler system in my building?
|
| A: |
The minimum clearance required to install the Energy Miser® system is
approximately 14 inches. Lowering a sprinkler system is relatively inexpensive
compared to the thermal savings achieved using the Energy Miser®. Consult your
local sprinkler contractor to verify what the minimum clearance requirement
must be from the sprinkler head to the ceiling.
|
|
| Q: |
Do I have to have to shut down my business while the Energy Miser® system is
being installed?
|
| A: |
No! Since 1985 ICA has installed over 14 million square feet of insulation with
little or no interruption to daily operations.
|
|
| Q: |
What warranty does the Energy Miser® system have?
|
| A: |
ICA offers a one-year warranty on materials and workmanship.
|