| Q: |
What R-value is the Energy Miser® Insulated Ceiling & Wall System available
in? |
| A: |
The Energy Miser® system is available at R-10 and higher R-values.
|
|
| Q: |
What kind of thermal savings can I achieve using the Energy Miser® system? |
| A: |
The Energy Miser® system is ASTM C236 Guarded Hot Box tested to perform to
certified R-values. It is possible to save as much as 60% on your utility
bills. |
|
| Q: |
How does the Energy Miser® system install in my building? |
| A: |
The Energy Miser® hardware parallels to the purlins and is attached to the
bottom, suspending approximately eight inches. It can also be installed so that
all the mainframe steel is covered. It is recommended that proper ventilation
be used when covering the mainframe beams.
|
|
| Q: |
What is the Energy Miser® hardware? |
| A: |
The hardware consists of rows of white or galvanized tubes spaced at 10'-12' on
center. They attach to virtually any type building using an I-Bolt and the
appropriate type clip-head for the structure.
|
|
| Q: |
What does proper ventilation mean? |
| A: |
Proper ventilation means ridge and eave vents are installed in order to control
condensation the cavity between the insulation and the roof deck.
|
|
| Q: |
Can ICA install the ventilation? |
| A: |
Yes! The crews ICA sends to install the insulation have a great amount of
experience installing the ventilation. It is recommended that an independent
engineer or consultant be contacted to insure the proper quantity of
ventilation is used for your facility.
|
|
| Q: |
Can I insulate my walls with the Energy Miser® system? |
| A: |
Yes! The Energy Miser® system is designed so that the walls can be insulated in
conjunction with the ceiling. In doing this, the ceiling and wall are
manufactured as one piece.
|
|
| Q: |
I have this ugly “blow-on” insulation that keeps falling to the ground. Do I
have to remove it? |
| A: |
No! The Energy Miser® system can be installed without having to remove any
existing insulation.
|
|
| Q: |
Does ICA have a representative or installer in my area that can come look at my
building? |
| A: |
ICA has offices in Kansas and New York. Contact us at (800) 373-4262 for
pricing inquiries. We have crews that travel across the country that can do
installations in every size rink.
|
|
| Q: |
I have a maintenance crew and I think I can install the Energy Miser® myself.
Can this be done? |
| A: |
Yes! ICA can sell the materials only if you want to install the system yourself
or have a local contractor do it. We have an installation manual and phone
support for any questions. You can also hire one of ICA’s foremen for a couple
of days to get your crew trained.
|
|
| Q: |
I like the way the Energy Miser® system installs, but I don’t want to lose the
light I get from my skylights. |
| A: |
No problem. For a nominal price the skylights can be “boxed-out” and the
ceiling fastened around them. But it has been our experience that most
skylights aren’t energy efficient and a majority of companies have lights on
during the day. Covering the skylights will save utility costs since the
insulation facing is an 85% reflective material.
|
|
| Q: |
What if I have a sprinkler system in my building? |
| A: |
The minimum clearance required to install the Energy Miser® system is
approximately 14 inches. Lowering a sprinkler system is relatively inexpensive
compared to the thermal savings achieved using the Energy Miser®. Consult your
local sprinkler contractor to verify what the minimum clearance requirement
must be from the sprinkler head to the ceiling.
|
|
| Q: |
Do I have to have to shut down my business while the Energy Miser® system is
being installed? |
| A: |
No! Since 1985 ICA has installed over 14 million square feet of insulation with
little or no interruption to daily operations.
|
|
| Q: |
What warranty does the Energy Miser® system have? |
| A: |
ICA offers a one-year warranty on materials and workmanship. |